Home > Adhesives > Adhesive Accesories > Retaining Caps for Acrylic-Tie Adhesive >

1-1/4" Cap for AT Adhesive
1-1/4" Cap for AT Adhesive
 
Price: $1.06


Product Code: ARC125-RP25
Qty:

Description
 
  • Cap Enables Overhead and Horizontal Installation Easier by Preventing the Adhesive from Running Out of the Hole
  • An X is Cut into the Cap for the Mixing Nozzle and Rod to be Placed Through
Features
  • Cap Depth: 7/8"
  • Cap Depth: 7/8"
  • Required Hole Diameter: 1-3/8"
  • Required Hole Diameter: 1-3/8"

Share your knowledge of this product with other customers... Be the first to write a review


5/16"-18 x 3/4" Button Head Cap Screw Grade 8 Plain Finish $0.24
7/16" Internal Tooth Lockwasher Zinc Plated Steel $0.08
10mm Deep Length Magnetic Impact Socket 1/2" Drive $27.30
50 Grit 2" x 132" Aluminum Oxide Closed Coat Sanding Belts $88.96
5/16"-18 x 1-1/4" Phillips Flat Head Machine Screw 18-8 Stainless $0.50
#6-32 x 3/8" Socket Head Cap Screw Grade 8 $0.07
5/8" Compression Delrin Sleeve $0.39
3" x 12' Lifting Straps $65.52
7/8" Compression Brass Sleeve $1.27