Home > Fasteners > Screws > Type F Thread Cutting Screws > Phillips Flat Head Undercut Type F > 18-8 Stainless Steel >

1/4"-20 x 1/2" Phillips Flat Head Undercut Type F 18-8 Stainless Steel
1/4"-20 x 1/2" Phillips Flat Head Undercut Type F 18-8 Stainless Steel
 
Price: $0.36


Product Code: 10023816
Qty:

Description
 
Undercut Phillips Flat Head Type F Screws have a machine screw thread with a blunt point.  There is a cutter on the end of the screw that allows the screw to self-tap itself into a pre-drilled hole.  Made of 18-8 Stainless Steel.  For use in heavy gauge sheet metal and softer alloys. The undercut aloys the screws to sit flush in a thin piece of material such has a hinge.  To measure the length of a flat head screw measure from the flat part of the head to the bottom of the threads.
Features
  • Drive Type: #3 Phillips

Share your knowledge of this product with other customers... Be the first to write a review


1/4" Dropin Anchor 303 Stainless Steel $2.30
3" Extension Locking Pin Impact Socket 3/4" Drive $42.12
9/16" Standard Length Magnetic Impact Socket 1/2" Drive $15.60
3" Extension Pin Hole Impact Socket 3/4" "Drive $34.32
5/8"-11 x 3" Hex Head Cap Screw Fully Threaded 18-8 Stainless $3.50
5/8"-11 x 2-1/2" Hex Head Cap Screw Fully Threaded 18-8 Stainless $2.75
#6 x 5/8" Phillips Flat Head Hardware Screw Antique Brass $37.27
5/8"-11 x 2" Hex Head Cap Screw 18-8 Stainless Steel $2.52
3/8" Tube x 1/4" MPT Male 45 Degree Elbow-DOT Push In Air Brake $19.52