10-32 x 1/2 Phillips Flat Head Machine Screw 18-8 Stainless Steel

Home > Fasteners > Screws > Machine Screws > Phillips Flat Head > 18-8 Stainless Steel > 10-32 Phillips Flat Head 18-8SS >

#10-32 x 1/2" Phillips Flat Head Machine Screw 18-8 Stainless Steel

Price: $0.08

Product Code: 1000438

Qty:

Description

Phillips Flat Head Machine Screws are screws with a machine thread for a tapped hole or to accept a nut. Flat head machine screws have countersunk head to be able to sit flush with in a 82 degree tapered hole. Made of 18-8 Stainless Steel (18% Chromium, 8 % Nickel). For use in marine corrosive environments. To measure the length of a flat head screw measure from the flat part of the head to the bottom of the threads.

Features

Drive Type: #2 Phillips

Share your knowledge of this product with other customers... Be the first to write a review

	7/8"-14 x 5-1/2" Hex Head Cap Screw Grade 8 $5.77
	#1 x 1" Square Screwdriver Bit $0.65
	1-7/8" Deep Length 8 Point Impact Sockets 1" Drive $220.90
	1"-14 Hex Nut Grade 8 $1.87
	36 Grit 2" x 132" Aluminum Oxide Closed Coat Sanding Belts $118.84
	T20 x 1" Torx Screwdriver Bit $0.72
	#12-#10 Gauge 3/8" Nylon Ring $0.44
	M3-0.5 x 3mm Socket Cup Point Set Screw A2 Stainless Steel $0.14
	3/8"-16 x 72" 304 Stainless Steel Threaded Rod $23.40