10-32 x 1/2 Phillips Flat Head Machine Screw 18-8 Stainless Steel

Home > Fasteners > Screws > Machine Screws > Phillips Flat Head > 18-8 Stainless Steel > 10-32 Phillips Flat Head 18-8SS >

#10-32 x 1/2" Phillips Flat Head Machine Screw 18-8 Stainless Steel

Price: $0.08

Product Code: 1000438

Qty:

Description

Phillips Flat Head Machine Screws are screws with a machine thread for a tapped hole or to accept a nut. Flat head machine screws have countersunk head to be able to sit flush with in a 82 degree tapered hole. Made of 18-8 Stainless Steel (18% Chromium, 8 % Nickel). For use in marine corrosive environments. To measure the length of a flat head screw measure from the flat part of the head to the bottom of the threads.

Features

Drive Type: #2 Phillips

Share your knowledge of this product with other customers... Be the first to write a review

	5/32" x 1" Hex Screwdriver Bit $0.75
	1/2" Inverted Flare Brass Nut $5.04
	#10-32 x 1/2" Socket Head Cap Screw Grade 8 $0.07
	1/4" Malleable Wire Rope Clip Zinc Plated $0.81
	SET & ET Steel Screens for 3/4" Rod x 17" $24.19
	M10-1.5 Hex Nut A2 Stainless Steel $0.22
	80 Grit 3" x 24" Aluminum Oxide Closed Coat Sanding Belts $33.16
	25mm Standard Length Impact Sockets 1" Drive $48.67
	7/16"-14 Nylon Insert Locknut 316 Stainless Steel $0.72