10-32 x 1/2 Phillips Flat Head Machine Screw 18-8 Stainless Steel

Home > Fasteners > Screws > Machine Screws > Phillips Flat Head > 18-8 Stainless Steel > 10-32 Phillips Flat Head 18-8SS >

#10-32 x 1/2" Phillips Flat Head Machine Screw 18-8 Stainless Steel

Price: $0.08

Product Code: 1000438

Qty:

Description

Phillips Flat Head Machine Screws are screws with a machine thread for a tapped hole or to accept a nut. Flat head machine screws have countersunk head to be able to sit flush with in a 82 degree tapered hole. Made of 18-8 Stainless Steel (18% Chromium, 8 % Nickel). For use in marine corrosive environments. To measure the length of a flat head screw measure from the flat part of the head to the bottom of the threads.

Features

Drive Type: #2 Phillips

Share your knowledge of this product with other customers... Be the first to write a review

	1"-14 Hex Nut Grade 8 $1.87
	1" Female x 3/4" Male Adapter Locking Pin Impact Socket 1" Drive $61.78
	#16-#14 to #12-#10 Gauge Step Down Heat Shrink Butt Connector $2.11
	31mm Deep Length 12 Point Impact Socket 3/4" Drive $54.29
	3/4" Inverted Flare Steel Nut $6.40
	1/4" Flat Washer 316 Stainless Steel $0.08
	12 Piece 3/8" Drive 6 Point Deep Fractional Universal Impact Set $319.80
	29mm Deep Length Impact Socket 3/4" Drive $37.44
	5/16" x 1-1/2" Fender Washer 18-8 Stainless Steel $0.33