1/4-20 x 3/8 Phillips Flat Head Machine Screw 18-8 Stainless Steel

Home > Fasteners > Screws > Machine Screws > Phillips Flat Head > 18-8 Stainless Steel > 1/4-20 Phillips Flat Head 18-8SS >

1/4"-20 x 3/8" Phillips Flat Head Machine Screw 18-8 Stainless Steel

Price: $0.15

Product Code: 1000466

Qty:

Description

Phillips Flat Head Machine Screws are screws with a machine thread for a tapped hole or to accept a nut. Flat head machine screws have countersunk head to be able to sit flush with in a 82 degree tapered hole. Made of 18-8 Stainless Steel (18% Chromium, 8 % Nickel). For use in marine corrosive environments. To measure the length of a flat head screw measure from the flat part of the head to the bottom of the threads.

Features

Drive Type: #3 Phillips

Share your knowledge of this product with other customers... Be the first to write a review

	41mm Deep Length Impact Sockets 1" Drive $71.14
	40 Grit 1-1/2" Wide DA-F Handy Sanding Roll $64.41
	22mm Deep Length Impact Socket 1/2" Drive $19.66
	15/16" Deep Length Impact Socket 1/2" Drive $24.34
	1-13/16" Deep Length Impact Sockets 1" Drive $80.50
	SET & ET Steel Screens for 3/4" Rod x 17" $24.19
	26mm Standard Length Impact Socket 1/2" Drive $16.85
	2-7/8" Standard Length Impact Socket 3/4" Drive $149.76
	13lb Snake Magnet $40.46