Home > Fasteners > Screws > Type F Thread Cutting Screws > Phillips Flat Head Undercut Type F > 18-8 Stainless Steel >

#10-24 x 7/16" Phillips Flat Head Undercut Type F 18-8 Stainless Steel
#10-24 x 7/16" Phillips Flat Head Undercut Type F 18-8 Stainless Steel
 
Price: $0.21


Product Code: 10023514
Qty:

Description
 
Undercut Phillips Flat Head Type F Screws have a machine screw thread with a blunt point.  There is a cutter on the end of the screw that allows the screw to self-tap itself into a pre-drilled hole.  Made of 18-8 Stainless Steel.  For use in heavy gauge sheet metal and softer alloys. The undercut aloys the screws to sit flush in a thin piece of material such has a hinge.  To measure the length of a flat head screw measure from the flat part of the head to the bottom of the threads.
Features
  • Drive Type: #2 Phillips

Share your knowledge of this product with other customers... Be the first to write a review


M4-0.70 x 16mm Socket Head Cap Screw Grade 12.9 $0.14
3/4"-10 x 8" Carriage Bolt Hot Dipped Galvanized $6.40
50 Grit 3/4" x 18" Zirconium Closed Coat Sanding Belts $15.04
#16-#14 Gauge Heat Shrink Butt Connector $0.58
3/8"-16 x 4" Socket Head Cap Screw Grade 8 $0.86
SET & ET Steel Screens for 3/4" Rod x 13" $6.57
80 Grit 1/2" x 24" Aluminum Oxide Closed Coat Sanding Belts $12.60
8-1/2" Light Duty Stronghand Utility Clamp with Spring Stop $34.24