Home > Accessories > Drills > Magnetic Drill Accessories
82 Degree Carbide Insert Adapter Kit Alternative Coolant Systems Arbor Extensions Drill Chucks Drill Handle
Pipe Adapter Kit Ratchet Drives Rotaloc Spindle Adapters Slick-Stick Lubricant Spindle Adapters
Swivel Base Upgrade Kit Tapping Attachment Kits Twist Drill Adapter Vaccum Base Attachment
Sort By:
Page of 3
HMD904 Chuck adapter (old style threaded)
HMD904 Chuck adapter (old style threaded)
  • For Use with HMD904 Chuck adapter (old style threaded)

Price: $30.00
Qty Add
For use with Model HMD904
For use with Model HMD904
  • For Use in Drilling in Confined Areas
  • Ratchet Drive May be Operated From Either Side of Drill

Price: $75.00
Qty Add
For use with HMD904 (Threaded drive)
For use with HMD904 (Threaded drive)
  • Incorporates a Planetary Gear Reverse with a 1:1 Ratio
  • Reversing Speed is Equal to Spindle Speed So In-Feed and Out-Feed of the Unit can be Employed Without Reversing Moter Direction

Price: $675.00
Qty Add
Chain Mount for use with HMD904, HMD914, HMD505 & HMD508
Chain Mount for use with HMD904, HMD914, HMD505 & HMD508
  • Allows for Clamping on 3" to 12" Schedule 160 Pipe

Price: $350.00
Qty Add
Twist Drill Adapter
Twist Drill Adapter
  • Adapter Accepts a Modified 118 Degree Twist Drill with a 1/4" Flatted Shank that Secures in Adapter with a Set Screw
  • Adapter Only, Kit is Not Included

Price: $33.00
Qty Add
Vacuum Base Attachment
Vacuum Base Attachment
  • Works with HMD904 with Non-Ferrous Materials, Diamond Plate, and Materials with Surface Imperfections Up to 3mm Deep
  • Safety Switch Shuts Off Drill Motor if Air Pressure Drops
  • Standard Shop Air Provides 761lb of Surface Holding Power at 85kpa

Price: $725.00
Qty Add
16oz Gravity Feed Bottle Assembly Kit for HMD904 Spindle drive
16oz Gravity Feed Bottle Assembly Kit for HMD904 Spindle drive
  • Pressurized Coolant System for the HMD505 and HMD904
  • Used for Drilling When Gravity Feed Coolant is Not Applicable

Price: $150.00
Qty Add
Swivel Base Upgrade Kit for 10904, HMD904, &HMD925 (120V)
Swivel Base Upgrade Kit for 10904, HMD904, &HMD925 (120V)
  • Swivel Base has a 1-3/8" Forward and 1-1/8" Side to Side Movement
  • Upgrades Limits Of Depth of Cut to 1-1/4" for HMD904 and HMD925
  • Upgrades Limits of Depth of Cut to 2-1/4" for HMD914

Price: $325.00
Qty Add
Handle to fit Hougen Motors
Handle to fit Hougen Motors
  • Convenient Handle to Help Carry HMD115" HMD150" HMD904, and HMD925

Price: $16.00
Qty Add
1" Arbor Extender Assembly
1" Arbor Extender Assembly
  • Arbor Extender for Rotabroach 12000 Series Cutters

Price: $75.00
Qty Add
1/2" Low Buck Chuck with Key HMD904, HMD914 & HMD925
1/2" Low Buck Chuck with Key HMD904, HMD914 & HMD925
  • 1/2" Chuck Requires 05536 Spindle Adapter for Model HMD904 and HMD925
  • Model HMD914 Requires Spindle Adapter 40341 for Either Chuck Size

Price: $60.00
Qty Add
16oz Slick-Stik Lubricant
16oz Slick-Stik Lubricant
  • Soft Lubricant for Easy Application
  • Superior Adhesion to the Tool
  • Specially Formulated for Use with Rotabroach Cutters

Price: $15.00
Qty Add
(1) 82deg Double Fluted Countersink with Carbide Inserts Kit
(1) 82deg Double Fluted Countersink with Carbide Inserts Kit
  • Countersink Provides 82 Degree Chamfers on Holes Quickly and Easily
  • Carbide Inserts Included: 9/16, 11/16, 13/16, 15,16
  • Torx Wrench Included
  • Pilots Included

Price: $195.00
Qty Add
Rotaloc Adapter Assembly
Rotaloc Adapter Assembly
  • Adapter Allows for Use of Rotaloc or Rotaloc Plus Annular Cutters in any Drill that Excepts Rotabroach 12000 Series Cutters

Price: $95.00
Qty Add
HMD915 3/4" Shank adapter
HMD915 3/4" Shank adapter
  • For Use with HMD915 3/4" Shank adapter

Price: $125.00
Qty Add
Replacement Adapter
Replacement Adapter
  • Adapter Allows for Use of Rotaloc or Rotaloc Plus Annular Cutters in any Drill that Excepts Rotabroach 12000 Series Cutters

Price: $90.00
Qty Add
For use with HMD904 (Hex drive)
For use with HMD904 (Hex drive)
  • Incorporates a Planetary Gear Reverse with a 1:1 Ratio
  • Reversing Speed is Equal to Spindle Speed So In-Feed and Out-Feed of the Unit can be Employed Without Reversing Moter Direction

Price: $775.00
Qty Add
16oz Gravity Feed Bottle Assembly Kit for Use with HMD904 Hex drive
16oz Gravity Feed Bottle Assembly Kit for Use with HMD904 Hex drive
  • Pressurized Coolant System for the HMD505 and HMD904
  • Used for Drilling When Gravity Feed Coolant is Not Applicable

Price: $150.00
Qty Add
Swivel Base Upgrade Kit for HMD904, HMD925, HMD908 &HMD928 (230V)
Swivel Base Upgrade Kit for HMD904, HMD925, HMD908 &HMD928 (230V)
  • Swivel Base has a 1-3/8" Forward and 1-1/8" Side to Side Movement
  • Upgrades Limits Of Depth of Cut to 1-1/4" for HMD904 and HMD925
  • Upgrades Limits of Depth of Cut to 2-1/4" for HMD914

Price: $325.00
Qty Add
2" Arbor Extender Assembly
2" Arbor Extender Assembly
  • Arbor Extender for Rotabroach 12000 Series Cutters

Price: $80.00
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>