|
|
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
1/8" 45 Degree Street Elbow Brass Pipe Fitting
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
- Meets specifications of ASA,
ASME, and SAE. - Working pressure: 1200 PSI.
- Temperature range -65°F-250°F.
- For a complete seal tighten approximately 2-1/2 turns.
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
|
|
Qty
|
Add
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
1/4" 45 Degree Street Elbow Brass Pipe Fitting
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
- Meets specifications of ASA,
ASME, and SAE. - Working pressure: 1200 PSI.
- Temperature range -65°F-250°F.
- For a complete seal tighten approximately 2-1/2 turns.
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
|
|
Qty
|
Add
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
3/8" 45 Degree Street Elbow Brass Pipe Fitting
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
- Meets specifications of ASA,
ASME, and SAE. - Working pressure: 1200 PSI.
- Temperature range -65°F-250°F.
- For a complete seal tighten approximately 2-1/2 turns.
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
|
|
Qty
|
Add
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
1/2" 45 Degree Street Elbow Brass Pipe Fitting
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
- Meets specifications of ASA,
ASME, and SAE. - Working pressure: 1200 PSI.
- Temperature range -65°F-250°F.
- For a complete seal tighten approximately 2-1/2 turns.
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
|
|
Qty
|
Add
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
|
|
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
3/4" 45 Degree Street Elbow Brass Pipe Fitting
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
- Meets specifications of ASA, ASME, and SAE.
- Working pressure: 1000 PSI.
- Temperature range -65°F-250°F.
- For a complete seal tighten approximately 2-1/2 turns.
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif)
|
|
Qty
|
Add
|
|
![](/v/vspfiles/templates/vitamins/images/clear1x1.gif) |
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|